GradeA non-combustible melamine coated decorative mgo panels
Product Description
Grade A non-combustible decorative interior wall paneling with melamine coating ting
Melamine decorative board is laminated with melamine-impregnated paper. MgO Board is a strong, high quality, fire-proof, mineral-based building material used to replace plywood, fiber cement panels, OSB and gypsum wallboards. It is an extremely versatile product for use with interior and exterior construction. It is mading from bonding certain elements (including MgO nesium and oxygen) which results in an extremely strong cement-like material. Similar compounds have been used for construction purposes for hundreds of years in such world-famous sites such as the Great Wall of China, Rome's Pantheon, and extensively throughout one of the world's tallest buildings, Taipei 101.
Specifications:
1. Size: 1220*2440mm
2. Thickness: 3mm to 15mm
3. Other specifications available
Face:melamine one side or two sides(no Kraft paper between melamine paper and mgo)
Surface: Matt, Glossy, Relief, Grain, etc
Basic material: MGO BOARD(magnesium oxide board)whose surface is laminated with melamine-impregnated paper.
| Length | 2440mm | ||||
| Width | 1220mm | ||||
| Thickness | 3mm,6mm,8mm,12mm,15mm,18mm | ||||
| Density | 1.0-1.4G/CM³(JC688-2006) | Impermeability | No water droplets,no getting damp(JC688-2006) | Bending Strength(JC688-2006) | 29MPA |
| Moisture Content | ≤10%(JC688-2006) | ≤3%(JC688-20) | Moisture Deflection | 0.2MM | |
| Dry Shrinkage
| ≤0.3%(JC688-2006) | Surface Resistant to Dry Heat | No cracks, no blisters | Combustion Performance | Class A(GB8624-2006) |
| Moisture Movement | ≤0.6%(JC688-2006) | Surface Crack Resistance | 0 level | Fire-resistant Limit | ＞2Hrs |
| Screw Holding Force | ≥15N/MM (JC688-2006) | Veneer Bonding Strength | 1.1MPA | Air Insulation of Sound | ＞42DB |
| Impact Strength | ＞6.0KJ/M² | Thermal Conductivity | 0.109 temperature equalization 30±5℃ | Flexural Strength After Drying | 15MPA |
| 100% environmental protection: | No radioactive materials, no formaldehyde, no asbestos, no benzene. | ||||
| Water Permeability | No significant wetting or water droplets on the back(CECS95:97) | ||||
1. Good visual effect
The panel can be made into different into designs with vivid gloss.
2. Tough, abrasion-resistant, heat-resistant
3. Acidproof, alkaliproof, oilproof
4. With smooth surface, easy to clean
5. Fireproof: Grade A non-combustible
6. Waterproof
7. Healthy and environmental friendly, doesnt contain asbestos, formaldehyde or benzene
Application
Interior decoration used in furniture, cabinet, Marine, kitchen, bathroom, teapots, windowsills, interior wall panel etc.
Q1: How does MgO perform with temperature fluctuations such as heat, thaw, freeze and humidity?
A2: The possibility of expansion for MgO Board is low however there is some hydrothermal movement. You can leave smaller gaps to accommodate for lower expansion or shrinking. Mg is highly resistant to extreme outdoor environmental exposure such as rain and strong winds as long as it is properly coated.
A2: No. MgO Board is considered mmoisture resistant, however during periods of extended exposure, moisture can affect it and it will experience hydrothermal expansion. When used outdoors, MgO panel should be covered or coated to protect it from the elements.
A3: It is made by combining the carbon out of MgO nesium carbonite; commonly called “MgO” due to its chemical composition of MgO nesium (chemical symbol Mg) and oxygen (chemical symbol O). When oxygen is combined with MgO nesium under heat and pressure, it can produce a stone-like material: MgO. It is ground up into a powder, which is then combined with water to make a cement-like (adhesive) material. MgO also contains other components but MgO is the primary component.
Pure MgO nesium, in its raw form, burns. MgO, however, is completely nonflammable and is used for fireproofing.
The chloride content of our MgO panel is regulated during our manufacturing process and our boards average approximately 8%. Additionally, our dissolvable (free) chloride ion content is less than 5% and our sulfate content averages 0.2%. This is not to be confused with the MgO nesium Chloride content, which is 40%.
The research institute laboratory is responsible for the company's raw material entry inspection, product process inspection, product delivery inspection, new product research and development experiments, verification and testing.
The laboratory can perform apparent density, flexural strength, impact strength, moisture content, dry shrinkage, swelling rate, screw holding force, water absorption, softening coefficient, embrittlement coefficient, dry warpage rate, free chloride ion, resistance Testing of items such as halogen return, thermal conductivity, compressive strength, etc.
1.Strong plywood pallet 2.Strapped with PET rope 3.Protect corner & edges 4.PE film covered on the 6 surfaces
Whatsapp/wechat: +86 18264133237(Amy Zhang) +86 18754133238(Linjing Zhao)
Email: amy AT sdlceat.com
Product Categories : MgO Decorative Board > 3mm Decorative Board