higher barrier metallized PET film
Basic Info
Model No.: MPET
Product Description
strong water resistance
high temperature resistance.
good barrier
higher barrier metallized PET film Application: it can be used for demanding places, composite structure with three layers,partly can use two layers instead of three layers. It is widely used for milk powder,coffee,cosmetics,jelly,wines,drinks ,pesticides and snackes packing etc,it can also extend the shelf lift of contents, have a good fragrance retention ,replace part of packaging foil composite structure, use for higher water resistance, improve for liquid packaging Specification : Thickness :12 MIC etc Width:≤2100mm Paper core 76mm(3″),152mm(6″) Features: high adhesion between film and alumium layer after chemical treatment on the surface of film Due to high adhesion of aluminium layer,No Al layer peels the shelf of life can be retained, 3.a higher barrier can be achieved by increasing the thickness of Al layer. 4.strong water resistance 5. high temperature resistance.
Item |
| Unit | Index | Test conditions |
Tensile strength
| MD | Mpa | 210 | Temperature 23°C Relative humidity 40% |
TD | Mpa | 202 | ||
Elongation at Break | MD | % | 115 | |
TD | % | 108 | ||
Friction of coefficient | The surface without Al plating/surface without Al plating | ---- | 0.56 | |
Equality of aluminized layer
| % | ±5 | ||
Fastness of the aluminized layer
| % | No Aluminized layer peels | ||
Wetting tension of Aluminum layer
| Mn/m | 54 | ||
Thickness of the aluminized layer | A | 500 | ||
Moisture vapor transmission rate | g/(m2·24h) | 0.58 | Temperature 38°C Relative humidity :91% | |
Oxygen trnamission rate | Cm3/(m2·24h·0.1Mpa) | 0.95 |
Product Categories : Metallized New Materials Film > Nano Coating Metallized Film